Testing Usability, Learning Ethics

Testing Usability, Learning Ethics

Joe Jeyaraj

English

Planning and Testing User Documentation (Eng 3780)

Activity Description: Provide a brief description of the activity

Students will do usability testing of a health document either they or a friend or relative may have used.

Learning Goals: What do you aim to achieve with this activity?

How well the document works for its audience and purpose.

Timing: At what point in the lesson or semester do you use this activity? How much classroom time do you devote to it? How much out-of-class time is expected?

In the second section of the course.

Logistics: What preparation is needed for this activity? What instructions do you give students? Is the activity low-stakes, high-stakes, or something else?

As assignments go, it is simple in its planning, but complex in its completion.

Assessment: How do you assess this activity? What assessment measures do you use? Do you use a VALUE rubric? If not, how did you develop your rubric? Is your course part of the college-wide general education assessment initiative?

I use a rubric that I have for upper level courses in technical and professional writing.

Reflection: How well did this activity work in your classroom? Would you repeat it? Why or why not? What challenges did you encounter, and how did you address them? What, if anything, would you change? What did students seem to enjoy about the activity?

I have given students a document I have personally used, and students generally respond well to this type of assignment because it involves their personal life.

Additional Information: Please share any additional comments and further documentation of the activity – e.g. assignment instructions, rubrics, examples of student work, etc. These can be links to pages or posts on the OpenLab.

Please share a helpful link to a pages or post on the OpenLab

Network Brand (The Manifesto pt1)

Network Brand (The Manifesto pt1)

George Larkins

Communication Design

COMD 3521 Motion Design 1

Activity Description: Provide a brief description of the activity

Students are to create a manifesto designed to launch their network. Here is where it all starts. Where they have to look within themselves and develop the courage to share their beliefs with the world. I have them start off with what they believe and what they know to be true. Ex. I believe that racism is real. I know that discrimination exists in this society.

Learning Goals: What do you aim to achieve with this activity?

My aim here is to create an environment of ethical and honest reasoning designed to withstand the pressure that business demands. In addition to aid in rebuilding their self-belief system.

Timing: At what point in the lesson or semester do you use this activity? How much classroom time do you devote to it? How much out-of-class time is expected?

This project is part of their final. We devote two entire class sessions dealing with this. Out of class time is constantly encouraged. What I tell them is the more time you spend on a subject, the better it will become. If time permits, I share with them a video of the “Long Game, part 2.” https://vimeo.com/87448006

Logistics: What preparation is needed for this activity? What instructions do you give students? Is the activity low-stakes, high-stakes, or something else?

The instructions for this exercise is to start with a list of beliefs. What would do be doing right now in your perfect world? Are you preparing yourself go along with the future or are you preparing yourself to help shape the future? Do you believe that you can have an impact on this planet? Who are your design heroes, and why? And in order to do this, they have to develop the skills the right questions, not only questions from other people but of themselves as well. And have the courage to ask and answer honestly.

Assessment: How do you assess this activity? What assessment measures do you use? Do you use a VALUE rubric? If not, how did you develop your rubric? Is your course part of the college-wide general education assessment initiative?

I will use the creative thinking value rubric. I believe it fits this activity well.

Reflection: How well did this activity work in your classroom? Would you repeat it? Why or why not? What challenges did you encounter, and how did you address them? What, if anything, would you change? What did students seem to enjoy about the activity?

The activity went well, and yes, I will be repeating it. Why, because I believe it is an important skill set to have. That is having the courage to ask questions, be asked questions and give honest answers. My challenge has been getting students to manage the fear of being put in the spotlight. I address that issue by having students give their presentation in front of the class. One possibility would be to review some contemporary design and some history so that they would be more aware of the people that came before them. And also aid them in finding someone who could they can follow and be inspired by.

Additional Information: Please share any additional comments and further documentation of the activity – e.g. assignment instructions, rubrics, examples of student work, etc. These can be links to pages or posts on the OpenLab.

The next step here for will be to get more familiar using openLab.

Please share a helpful link to a pages or post on the OpenLab

Suspension Workshop

Suspension Workshop

Alexander Aptekar

Architectural Technology & Library /

LEARNING PLACES: UNDERSTANDING THE CITY

Activity Description: Provide a brief description of the activity

In this workshop, you will work in teams and groups of teams to create a model suspension bridge. Your model suspension bridge will be tested until structural failure. In reflections, you will individually analyze the strengths and weaknesses of your modeled suspension bridge.

Learning Goals: What do you aim to achieve with this activity?

• Developing your understanding of suspension structures
• Increasing your analysis and problem-solving abilities
• Sharpening your observation and reflection skills
• Deepening your collaborative team techniques

Timing: At what point in the lesson or semester do you use this activity? How much classroom time do you devote to it? How much out-of-class time is expected?

This workshop should occur towards the beginning of the semester as part of the introduction to observation skills and techniques.

Logistics: What preparation is needed for this activity? What instructions do you give students? Is the activity low-stakes, high-stakes, or something else?

Low-stakes

Each team will utilize the following kit of materials:
• Wood blocks (4” x ¾” × ¾”), 18 min
• String, 8’ lengths
• Straws, 14
• Sheets of paper, 3 @ 4” x 17”
• Scissors
• Masking tape, 3’ length
• Tape measure (only one for the workshop required)

Team goals
Construct a model of a suspension bridge utilizing only the materials provided. The bridge must be strong enough to support at least one cell phone at its center. [Recommendation; offer extra points for every additional cell phone the bridge can support]

Team makeup
Each bridge group will consist of two 3 to 4 member teams. Each team is responsible for one half of the bridge spanning from one of the supporting tables to the center of the bridge.

Bridging the gap
Each bridge group will need to span between two tables set 36” apart.

Bridge assembly
The bridge constructed should include the following parts:
• Anchorage (blocks)
• Deck (paper)
• Main cable (string)
• Suspender cables (straws)
• Tower (blocks)

Timing
Your bridge group will have 20 minutes to develop your solution before testing will commence.

Testing
The structural integrity and quality of your bridge will be tested by checking to see how many cell phones the bridge will be able to support. The class will observe as each bridge is tested. Be ready to document where and what are the causes of structural failure. At 20 second intervals, additional cell phones will be added to the Main span of the bridge until the bridge collapses. [It’s recommended that students be ready to catch their cell phones and have their hands under the bridge at least 3 inches away from the bridge deck]

Assessment: How do you assess this activity? What assessment measures do you use? Do you use a VALUE rubric? If not, how did you develop your rubric? Is your course part of the college-wide general education assessment initiative?

Reflections /Documentation
Each team member will need to post on the Open Lab their reflections on this workshop. Be sure to include the following issues in your reflections:
• What strategy did your team used to solve the problem?
• Did you use the iteration process effectively?
• What were the hardest team organization challenges?
• What are the hardest technical challenges?
• What part of the bridge did you think would collapse first?
• What part did collapse first and why?
• Include at least two photographs, sketches or diagrams in your reflection.

Assessment
This assignment will be evaluated by reviewing your reflections on the Open Lab. The focus of this evaluation will be the lessons learned in this workshop. Additional points will be given for each cell phone your groups bridge could support.

Reflection: How well did this activity work in your classroom? Would you repeat it? Why or why not? What challenges did you encounter, and how did you address them? What, if anything, would you change? What did students seem to enjoy about the activity?

Following are some quotes from student reflections on this project. Additional reflections can be seen at this site:

https://openlab.citytech.cuny.edu/aptekar-berger2205sp2017/assignments/216-reflection-on-suspension-bridgeobservation-sketch/

“Today’s class project was very challenging and hands on. It is something I enjoyed doing because my team worked well together to create a steady bridge. Although, it took some time to figure out how to actually build a proper bridge was kind of difficult considering I know nothing about architecture or building. My team mates worked together from putting straws together to taking down blocks to the table. Overall, we learned that the anchorage is the most important part which is something our bridge lacked. Now we know for next time what to spend more money on.”
Alexandra Linik

“…

3. I learnt that the cabling is as important as the others structures as well. Since it is suspension bridge, both the weight of the deck and the live loads will be hung by the suspenders. So the connection between the horizontal cable and vertical cables should be strong enough to hold all the weights. And the angle of the cable from the anchorage should be calculated in order to reduce the extra forces.

4. Lastly, I think we can design our towers of the bridge more pretty, because I learnt that putting weights on the towers do not help in order to stabilize the bridge.”
Alice Myint

“In today’s class the most interesting and challenging part was to make a suspension bridge using small wood blocks, ribbon, tape, paper and our creative mind of course. I got to know some of my classmates whom I have worked with throughout the project. I think architectural stuffs sounds like easy, but it’s really not and the worst experience was when we made the bridge and it’s collapsed twice. But we did not lose hopes and we made a well -organized and furnished bridge with beautiful two anchorages and deck. The “deck” should be strong because the weight on the bridge is related on the base and it’s connected to the deck of both sides of the bridge. We put 4 phones on the bridge and it was still in the same position, but however it collapsed when 5th phone added on the bridge. But in the class we had much fun when working with as a group. We were very excited to see how others work done and that was the coolest part because we can learn something how they made their own. Overall, it was very cool, making a bridge with elementary stuffs and a great experience to work with my classmates.”
Mdzafar Sadak

“The class project that we have was pretty intresting because we get to work together as we form two group. One group was to build one half of the bridge and the other group would do the other half of it. The challageing part was trying to combine the bridge and form a deck that could support the weight. We through that it would help but as it turn out after we finish building it and testing it that it wasn’t the deck that we create can support the weight it was the anchor was the most important part of it that would have support the weight of it. The thing that i learn most was no matter what type of bridge that people make if the anchor is not strong enough then the whole bridge would fall.”
Alan Qiu

Additional Information: Please share any additional comments and further documentation of the activity – e.g. assignment instructions, rubrics, examples of student work, etc. These can be links to pages or posts on the OpenLab.

I welcome comments and suggestions. I am be happy to provide you with more documentation including diagrams and photographs for this workshop. Don’t hesitate to reach out by email.

Please share a helpful link to a pages or post on the OpenLab

What Is True/What Is Fake? Journalism Today

What Is True/What Is Fake? Journalism Today

Aaron Barlow

English/Arts & Sciences

Introduction to Journalism

Activity Description: Provide a brief description of the activity

Relation of a story by the professor about an encounter with an elephant (though it can be any story relevant to the instructor’s life that can be verified to some degree, at least, through research). The students are then asked to determine what truth there is in the story, if any, and to justify their conclusions. After the first class, the students are asked to search diligently across the internet for proof/dismissal of the professor’s claims. At the end of the discussion, students vote on the truth (or lack of it) of the story. If they ask the professor to tell them if the vote is correct or not, the response should be a shrug and the comment, “The question is, can you trust me?” This generally leaves the students baffled for a moment but, as the course moves on to other considerations, they generally start to understand.

Learning Goals: What do you aim to achieve with this activity?

Students are expected to come away with an understanding of the limits of classroom authority and of research itself.

Timing: At what point in the lesson or semester do you use this activity? How much classroom time do you devote to it? How much out-of-class time is expected?

This exercise is best done early in the semester. It generally takes a full class period plus a couple of homework hours and then about half an hour of the next class.

Logistics: What preparation is needed for this activity? What instructions do you give students? Is the activity low-stakes, high-stakes, or something else?

The professor needs to prepare relation of the story carefully, including within it enough clues for the students to be able to research the claims made. Students need to be taking notes while the professor talks and need to understand the use that will be made of those notes in the homework assignment. Before beginning to tell the tale, the instructor needs to carefully prepare the students.

Assessment: How do you assess this activity? What assessment measures do you use? Do you use a VALUE rubric? If not, how did you develop your rubric? Is your course part of the college-wide general education assessment initiative?

Because of the nature of this activity, which lies outside of assessment structures and can be harmed by them, this is not assessed.

Reflection: How well did this activity work in your classroom? Would you repeat it? Why or why not? What challenges did you encounter, and how did you address them? What, if anything, would you change? What did students seem to enjoy about the activity?

I have been using and developing this exercise for a decade and in a number of different classes and will continue to do so. It helps students understand the differing reactions, in terms of truth value, to different speakers in different positions. Plus, it introduces them to research tasks of a sort they generally have not encountered in other classes.

Additional Information: Please share any additional comments and further documentation of the activity – e.g. assignment instructions, rubrics, examples of student work, etc. These can be links to pages or posts on the OpenLab.

As part of a book I edited, I include the story I use for this exercise: https://www.academia.edu/888435/Elephant_Morning. When I relate it, I tell it differently, making sure to include dates, places and verifiable events as a basis for student research. The structure of the essay itself comes out, in part, from earlier uses of this exercise–but it also contains its own inaccuracies, liberties taken for the sake of the story. Every instructor has a tale or her or his own that can be used similarly.

Please share a helpful link to a pages or post on the OpenLab

Exploring cultural differences in dental care

Exploring cultural differences in dental care

Anna Matthews

Dental Hygiene / SPS

Oral Anatomy DEN 1112

Activity Description: Provide a brief description of the activity

In Fall 2016, students in three sections of DEN1112 completed a term project assignment with the focus on Intercultural Knowledge and Skills assessment.
This assignment consisted of several parts.
Individually, students watched a Frontline PBS documentary “Dollars and Dentists” (http://www.pbs.org/wgbh/frontline/film/dollars-and-dentists/ ) which explores the complexity and availability of dental care in the U.S.
Next, students read the case study “Mortality associated with odontogenic infection” (Green et al., 2001) and answer accompanying questions. Students were asked to discuss the documentaries they watched in small groups. Students were provided questions for discussion prompting them to discuss their opinions regarding the status of dental health care in the U.S. as presented in the documentary. Students were also asked to share their cultural beliefs and attitudes towards dental care. Given the diversity of students in our Dental Hygiene program (over 50% of students were not born in the U.S. and speak over 20 primary/first languages), a difference of experiences and resulting opinions about health care more broadly and dental care in particular emerged in their discussions.

Individually, students wrote an essay reflecting on the Frontline documentary and the case study. Among the questions they were to address in their essay, they were asked to describe their interactions with peers in their groups and to evaluate how their own attitudes/opinions were or were not different from those of their classmates, what have they learned about other cultural beliefs/attitudes from the dialog with other students, how their own opinions have or have not changed as a result of the whole experience (watching the documentary and learning about the subject and their subsequent discussion of it in small groups).

Learning Goals: What do you aim to achieve with this activity?

1. introduce students to the complexity of dental care and its availability in the U.S.
2. connect the topics of spread of dental infection, as introduced in their Head & Neck portion of DEN1112 course, to the real-life situations leading to serious and life-threatening outcomes discussed in the scientific article (case study) and Frontline investigation.
3. work in teams to discuss the different cultural influences on how people perceive the necessity of dental care and its various aspects.
4. reflect on the whole experience by connecting all parts of this assignment in the written essay.

Timing: At what point in the lesson or semester do you use this activity? How much classroom time do you devote to it? How much out-of-class time is expected?

This assignment begins during week 13 of the Fall semester. The students discussed in small groups during class sessions twice for about 20 min. Depending on how long it takes students to write their 1200-1500 word essays, the activity would take at least 10 hours to complete outside of class.

Logistics: What preparation is needed for this activity? What instructions do you give students? Is the activity low-stakes, high-stakes, or something else?

This term project is worth 10% of their final grade for DEN1112. The students were given detailed instructions for each part of the assignment and provided with the PDF of the article and a link to Frontine documentary.

Assessment: How do you assess this activity? What assessment measures do you use? Do you use a VALUE rubric? If not, how did you develop your rubric? Is your course part of the college-wide general education assessment initiative?

In 2016, my course was part of college-wide assessment of Intercultural Knowledge and Skills. An appropriate AAC&U VALUE rubric was used for this evaluation, however, it was not used for grading. Students’ essays were evaluated based on the clarity and organization of the information, providing accurate and appropriate sources and citations (they were asked to substantiate their writing with at least two sources analyzing the topic of the video, other than the documentary itself), sentence structure, grammar and spelling.

Reflection: How well did this activity work in your classroom? Would you repeat it? Why or why not? What challenges did you encounter, and how did you address them? What, if anything, would you change? What did students seem to enjoy about the activity?

This activity worked very well and I intend to repeat it in Fall 2017. I don’t plan to introduce any changes at this time. The students seemed to enjoy the small group discussions and according to their reflections in the essays, they learned a lot from each other as well as the case study and Frontline documentary. One student’s essay was selected for publication in the 2017 issue of City Tech Writer.

Additional Information: Please share any additional comments and further documentation of the activity – e.g. assignment instructions, rubrics, examples of student work, etc. These can be links to pages or posts on the OpenLab.

Please share a helpful link to a pages or post on the OpenLab

Where does our steel come from?

Where does our steel come from?

John McCullough

Entertainment Technology/Tech and Design

ENT 2140 – Basic Welding

Activity Description: Provide a brief description of the activity

For this assignment, students will answer the question “where does Brooklyn get its steel?” by writing a 3-5 page paper describing some part of the steel supply chain. They could focus on how and where it is mined, how and where it is formed into the shapes we use, or how the finished product gets from its point of origin to the warehouses of Brooklyn steel yards. They can earn up to 5 points on their final grade by completing this assignment.

Learning Goals: What do you aim to achieve with this activity?

By completing this assignment, students will be able to describe the steel supply chain.

Timing: At what point in the lesson or semester do you use this activity? How much classroom time do you devote to it? How much out-of-class time is expected?

This will take place in the second half of the semester, when students are mostly working on their lab projects in class and have time outside of class for homework. I would expect students to spend up to five hours on this project.

Logistics: What preparation is needed for this activity? What instructions do you give students? Is the activity low-stakes, high-stakes, or something else?

This is an extra credit activity.

Assessment: How do you assess this activity? What assessment measures do you use? Do you use a VALUE rubric? If not, how did you develop your rubric? Is your course part of the college-wide general education assessment initiative?

Reflection: How well did this activity work in your classroom? Would you repeat it? Why or why not? What challenges did you encounter, and how did you address them? What, if anything, would you change? What did students seem to enjoy about the activity?

Additional Information: Please share any additional comments and further documentation of the activity – e.g. assignment instructions, rubrics, examples of student work, etc. These can be links to pages or posts on the OpenLab.

Please share a helpful link to a pages or post on the OpenLab