Reference assignment from 2019 Fall
Your wall section should be developed expressing your wall type (A, B, C, or D).
Submit your wall section details consisting of a minimum of two drawings (2 board, 24×36)
A-501 – Complete wall section
Show the wall from the foundation through to the second floor.
Cut the wall section through an area which includes a window.
Exclude roof (Roof details are required for the final submission)
A502 – Cantilevered detail
Show how the wall and second floor are constructed where there is a cantilevered second floor over the main entrance doorway.
Consider the following elements in your details:
- Air Barrier (Membrane)
- Anchor Bolts
- Apron
- Backfill
- Baseplate
- Batt Insulation
- Bituminous Expansion Joint
- Closed Cell Rigid Insulation
- Double Header
- Drainage Matt
- Fiber Cement Siding
- Finished Floor
- Footing
- Frost Line
- Joists
- Perforated Drainage Pipe
- Rim Joist
- Sill
- Sill Plate (Or Mudsill)
- Structural Sheathing (Plywood/OSB)
- Stud
- Subfloor
- Top Plate
- Vertical Battens
- Vertical Rebar
- Waterproofing (Membrane
SCALE
Full wall section ¼” or 1/8” to a foot
Detailed callouts 1” or 1-1/2” or 3” to 1’
All boards must contain:
Scale or graphic scale (for each unique drawing)
Dimensions as indicated
Custom titleblock
Correct drawings labelling and sheets numbering
Annotation for building component
Submittal:
2 boards, 24×36 in PDF format (minimum)
Autocad files (use e-transmit to pack and zip)
Titleblock must be a different file, use Xref to import it into your drawing.
How to name files: professor_F_19_first name-last name (drawing number).pdf
Example: Aptekar_F_19_Dwayne-Johnson(01).dwg
