B07 Wall Section

Your wall section should be developed expressing your wall type (A, B, C, or D).
Submit your wall section details consisting of a minimum of two drawings (2 board, 24Ă—36)

A-501 – Complete wall section
Show the wall from the foundation through to the second floor.
Cut the wall section through an area which includes a window.
Exclude roof (Roof details are required for the final submission)

A502 – Cantilevered detail
Show how the wall and second floor are constructed where there is a cantilevered second floor over the main entrance doorway.

Consider the following elements in your details:
• Air Barrier (Membrane)
• Anchor Bolts
• Apron
• Backfill
• Baseplate
• Batt Insulation
• Bituminous Expansion Joint
• Closed Cell Rigid Insulation
• Double Header
• Drainage Matt
• Fiber Cement Siding (or would sheathing to match case study project)
• Finished Floor
• Footing
• Frost Line
• Joists
• Perforated Drainage Pipe
• Rim Joist
• Sill
• Sill Plate (Or Mudsill)
• Sole plate
• Structural Sheathing (Plywood/OSB)
• Stud
• Subfloor
• Top Plate
• Vertical Battens
• Vertical Rebar
• Waterproofing (Membranes secondary and primary)

SCALE
Full wall section ¼” or 1/8” to a foot
Detailed callouts 1” or 1-1/2” or 3” to 1’

All boards must contain

  • Title with scale (for each unique drawing)
  • Callouts of details
  • Annotation
    • of building components
    • descriptions of components function
  • Dimensions as indicated
  • Custom titleblock
  • Correct drawings labelling and sheets numbering
  • Titleblock as a Xref in your drawing

Submittal:
2 boards, 24Ă—36 in PDF format (minimum)
Autocad files (use e-transmit to pack and zip).

Name files using the following naming convention:
course_professor initials_semester_project name_student name
(ex: ARCH2331_AA_Su20_Grid_JoseSanchez-01.jpg)
files not conforming to department standards may be graded.

Summer 2020 students please refer to the  final drawing submission list, the list below is from the Spring 2020 semester.

 

Drawing naming chart:

SHEET NUMBER SHEET NAME DESCRIPTION, CONTENT NOTES
STRUCTURAL SHEETS
S-010 FOOTING PLAN GRIDS, GRID DIMENSIONS, COLUMN TAGS, FOOTING STRUCTURAL CALCULATIONS
S-101 FIRST (GROUND) FLOOR FRAMING PLAN JOISTS, RIM JOIST, ANNOTATION (JOIST TYPES AND SIZES) SPANNING DIMENSIONS
S-102 FIRST (GROUND) FLOOR JOIST PLAN STUDS (CRIPPLES, KING, TRIMMER) INTERIOR AND EXTERIOR, ANNOTATION
S-103 STAIR PLAN AND SECTION GRIDS, GRID DIMENSIONS, COLUMN TAGS, ANNOTATED, LEDGER, THRUST BLOCK
ARCHITECTURAL DRAWINGS
A-100 CELLAR PLAN WINDOWS, ARCHITECTURAL CASEWORK, LABELS, DOORS…
A-101 GROUND FLOOR (guest rooms) INTERIOR WALLS, BATHROOM FIXTURES, ARCHITECTURAL CASEWORK, LABELS, DOORS…
A-102 FIRST FLOOR (living room kitchen) INTERIOR WALLS, BATHROOM FIXTURES, ARCHITECTURAL CASEWORK, LABELS, DOORS…
A-103 SECOND FLOOR (mezzanine bedroom) INTERIOR WALLS, BATHROOM FIXTURES, ARCHITECTURAL CASEWORK, LABELS, DOORS…
A-104 ROOF PLAN INTERIOR WALLS, BATHROOM FIXTURES, ARCHITECTURAL CASEWORK, LABELS, DOORS…
A-201 ELEVATIONS EAST & SOUTH ELEVATION MARKERS, HEAVY GROUND CUT LINE, ELEVATION MARKS [OPTIONAL] CELLAR OUTLINE
A-202 ELEVATIONS NORTH & WEST ELEVATION MARKERS, HEAVY GROUND CUT LINE, ELEVATION MARKS [OPTIONAL] CELLAR OUTLINE
A-301 BUILDING SECTIONS  [OPTIONAL] OVERALL SECTION(S)
A-501 FULL WALL SECTION OVERALL WITH FOUNDATION CALLOUT DETAILS [OPTION WITH FULL WALL SECTION WITH CANTILEVER]
A-502 FULL WALL SECTION DETAILS WITH JOIST TO STRUCTURE  AND WINDOW CALLOUT DETAILS
A-503 FULL WALL SECTION DETAILS WITH ROOF AMD CANTILEVER CALLOUT DETAILS
A-510 [OPTIONAL] PLAN WALL DETAILS CORNERS, DOOR AND WINDOW JAMB
XREF AUTOCAD DRAWINGS (LINKED DWG FILES)
N/A GRID (optional on this type project) GRIDS, GRID DIMENSIONS, NORTH ARROW
N/A TITLE BLOCK PROJECT, STUDENT, CLASS, AND DRAWING INFORMATION, YOUR LOGO