2 elevations
- North elevation
- South elevation
- West elevation (if applicable)
- East elevation (if applicable)
- Optional full building section
These elevations should reflect your added sloped roof. Your project should convert approximately at least 1/3 to a sloped configuration. A gable or hip roof configuration. You may add a roof Deck.
Considerations:
Indicate the ground level with a heavy line
dash in the outline of structure below grade
if you have a finish pattern use the lightest hatch line wait
Submittal:
submit as PDF prints and AutoCAD
2 boards, 22 x 34 (or 24×36) in PDF format, 2 elevations per board
AutoCAD DWG files and xrefs (“eTransmit” format)
10pm the day before your class the assignment is due
Name files using the following naming convention:
course_professor initials_semester_project name_student name (ex: ARCH2331_AA-KC_F21_Grid_JoseSanchez-01.jpg)
files not conforming to department standards may be graded.
Archive previous semester assignment version:
4 elevations
- North elevation
- South elevation
- West elevation
- East elevation
- Optional full building section
These elevations should reflect your added sloped roof. Your project should convert approximately at least 1/3 to a sloped configuration. A gable or hip roof configuration. You may add a roof Deck.
Considerations:
Indicate the ground level with a heavy line
dash in the outline of structure below grade
if you have a finish pattern use the lightest hatch line wait
Submittal:
submit as PDF prints and AutoCAD
2 boards, 22 x 34 (or 24×36) in PDF format, 2 elevations per board
AutoCAD DWG files and xrefs (“eTransmit” format)
10pm the day before your class the assignment is due
Name files using the following naming convention:
course_professor initials_semester_project name_student name (ex: ARCH2331_AA-KC_S20_Grid_JoseSanchez-01.jpg)
files not conforming to department standards may be graded.
