B08 Wall Section

Your wall section should be developed expressing your wall type (A, B, C, or D).
Submit your wall section details consisting of a minimum of two drawings (2 board, 24Γ—36)

A-501 – Complete wall section
Show the wall from the foundation through to the second floor.
Cut the wall section through an area which includes a window.
Exclude roof (Roof details are required for the final submission)

A502 – Cantilevered detail
Show how the wall and second floor are constructed where there is a cantilevered second floor over the main entrance doorway.

Consider the following elements in your details:
β€’ Air Barrier (Membrane)
β€’ Anchor Bolts
β€’ Apron
β€’ Backfill
β€’ Baseplate
β€’ Batt Insulation
β€’ Bituminous Expansion Joint
β€’ Closed Cell Rigid Insulation
β€’ Double Header
β€’ Drainage Matt
β€’ Fiber Cement Siding (or would sheathing to match case study project)
β€’ Finished Floor
β€’ Footing
β€’ Frost Line
β€’ Joists
β€’ Perforated Drainage Pipe
β€’ Rim Joist
β€’ Sill
β€’ Sill Plate (Or Mudsill)
β€’ Sole plate
β€’ Structural Sheathing (Plywood/OSB)
β€’ Stud
β€’ Subfloor
β€’ Top Plate
β€’ Vertical Battens
β€’ Vertical Rebar
β€’ Waterproofing (Membranes secondary and primary)

Full wall section ¼” or 1/8” to a foot
Detailed callouts 1” or 1-1/2” or 3” to 1’

Full wall section 1:50
Detailed callouts 1:5 or 1:10

All boards must contain

  • Title with scale (for each unique drawing)
  • Callouts of details
  • Annotation
    • of building components
    • descriptions of components function
  • Dimensions as indicated
  • Custom titleblock
  • Correct drawings labelling and sheets numbering
  • Titleblock as a Xref in your drawing

2 boards, 24Γ—36 in PDF format (minimum)
Autocad files (use e-transmit to pack and zip).

Name files using the following naming convention:
course_professor initials_semester_project name_student name
(ex: ARCH2331_AA_S21_Grid_JoseSanchez-01.jpg)
files not conforming to department standards may be graded.