REFLECTED CEILING PLANS
Due 3/26/13
For Assignment 14 you will develop your reflected ceiling plans, or RCPs. These should be at the same scale as your floor plans.
The purpose of the RCP is to show the building geometry at the ceiling level (including any openings in the ceiling), ceiling materials (including any panelization), ceiling heights, lighting types and locations, and anything else located at the ceiling plane.
You will need to select all of the light fixtures you will be using, and locate each of these fixtures on your RCPs. The location of your lighting should relate to the location of program in each area.
Give each light fixture a code, like you did for your materials and bathroom and kitchen fixtures, and tag (key) your RCPs with these codes. Your drawings should also be tagged with the material codes from your material palette and material list to show the ceiling material(s). You may want to use a key or legend for clarity.
Be sure to also include dimensions on your drawings, ceiling height, patterns to indicate materials and any paneling, and room names.
One or two 11×17’s of your work should be posted to the blog by next Tuesday, 3/26.
