instruction-manual PB-NRGY62-BRen-2016

Stainless Steel Rainscreen Panel

Rainscreens offer many benefits for exterior wall performance and maintenance. This reliable building envelope resists the elements, and protects against air and water infiltration-provided their connectors are specified correctly.

Will we need exterior insulation?

Yes. Exterior insulation has almost become the design standard in colder climate zones from North Carolina up the East Coast over to the Pacific Northwest. One of the most significant considerations we have seen for specifying the connection of rainscreen panels to the building is the emphasis on the effectiveness of the exterior insulation, as this design approach is so popular due to building codes according to Brian Nelson, general manager at Knight Wall Systems, Deer Park, Wash.

It’s important that the rainscreen connector be easily adjustable so workers in the field can easily fine-tune the installation to achieve precision. “The beauty of a rainscreen is that the waterproofing is taken care of behind the scenes-the rhythm of the rainscreen panels is independent of the waterproofing joints,” says San Francisco-based architect Charles F. Bloszies, FAIA.

“I am more concerned with the structural components beneath the panel,” he says. “The quality of the connections you don’t see are often more important than the finished surface you do see.” says  Christopher Costanza, RA, AIA, LEED AP, architect at 9X30 Design Architecture LLP, Rochester, N.Y.

Metal’s Weatherability

Open-joint rainscreen systems are designed to let limited moisture in, so architects must pay close attention to metal’s weatherability when specifying their connectors. A combination of dissimilar metal materials can cause cathodic corrosion. In some cases materials such as aluminum; will corrode if it is near dissimilar metals such as copper which leads to corrosion.

“Aluminum weathers well, as long as it’s not placed up against another dissimilar metal,” says John Barbara, AIA, LEED AP, senior associate at LEO A DALY, Washington, D.C. “If steel and aluminum are used together, a coating is needed to separate the two. Steel-only connectors need to be either coated or galvanized.

Reducing Thermal Bridging

“In a perfect world, we would use a fiberglass clip, which is a localized thermal break you attach to a hat channel,”says, Alex Terzich, AIA, of Minneapolis-based Hammel, Green and Abrahamson “But these are expensive and it’s often not in the cards for us to do that. So we look at different scenarios. Do we use intermittent Z-girts? These localized points of penetration through the insulation work well thermally, but they require a lot more layout and time. Do we use two lines of Z-girts? [They are] horizontals, with verticals on top of that, and where they cross is the one thermal bridge, which helps reduce thermal transmission. It’s a good option but also more material, more time, more cost. What we usually specify is a conventional, continuous linear Z-girt that’s bridging through the insulation, then we take that thermal bridge into account when we specify the insulation type and thickness to make sure we still meet the code-required system Uvalue requirement for the wall.”

Obviously, there are many details to rainscreen connector specification and many others not discussed in this article. Barbara believes it’s these details that often make or break a project, and bring it to the next level. “It really comes down to getting those details finessed,” he says. “The quality of the design documents is critical, but even more important is the builder’s ability to execute them, so good detailing that is buildable and resolved in the studio is essential.”

Reflected Cieling Details (roof)

Air Supply vents:

Acoustic panels

Reflected Cieling Details (lobby)

click for 3D tour

WHATS IS ANODIZING?

It is an electrochemical process that converts the metal surfaces into decorative, durable, corrosion- resistance, anodic oxide finish.

DRI DESIGN

SLOGAN :

“NO SEALANTS, GASKETS OR BUTYL TAPE IN THE PANEL JOINTS MEAN NO DIRTY STREAKS OR MAINTENANCE.”

Anodize Aluminum Panels:

Overview:

Successfully combines science and nature to create a great form of metal finish. The dense surface of the Aluminum is created utilizing the natural oxidation process and adding electricity and chemical to enhance the process and well as the outcome. This Aluminum process bring out the natural variation in colors which is expected.

PANEL INFO 

Specification:

 System Dimension:  1-1/4” Nominal

Material: Aluminum

Material Thickness: .08” standard (other gauges available)

Panel Joint:  ½” Nominal Standard (1/8” to 1”)

Finish:  Clear, Bronze, Champagne, and Black Anodizes

Weight: Less than 2 pounds per square foot

PRO:

• Exceptional abrasion Resistance, corrosion, chemical and solvents.
• Cost efficient
• Available in one-part or two-part panels.
• The anodize panel reveals the natural beauty of Aluminum while enhancing it strength and it aesthetic abilities.

CONS:

• Requires special processes to be welded.
• Prone to sever spring break.
• Abrasive to tooling.

Tom:

1. (Image Wall) Perforated Stainless Steel Rainscreen
2. Stick Glass Curtain Wall system

Yocelyne:

1. Metal Panel Wall
2. Concrete Wall

Chandanie:

1. Anodized aluminum wall
2. Brick veneer wall