Author Archives: ibn4course

Documentation for Ambidextrous Controller

Posted on December 18, 2012 by ibn4course

Ambidextrous Controller The arcade stick has not really changed into a commercial product and it is still seen as enthusiast’s product.  Part of the reason for that it is the arcade stick is still intimidating and doesn’t accommodate how people … Continue reading →

Posted in Uncategorized | Tagged , , , | Leave a comment

Ambidextrous Controller Group 7

Posted on December 13, 2012 by ibn4course

Today I assigned power and ground circuits for a micro-controller attached to the cnc mill.  I soldered several components and attached them to the controller. Several switches were constructed to theses power circuits to develop on and off components to … Continue reading →

Posted in Uncategorized | Tagged , , , , | Leave a comment

Ambidextrous Controller Group (6)

Posted on December 10, 2012 by ibn4course

Ahmad helped me to finish bolts that needed to be attached with the spring. And from there I reviewed the photos in the diagram to connect all the parts and reassemble the cnc mill. I also screwed in the final … Continue reading →

Posted in Uncategorized | Tagged , , , , , | Leave a comment

Ambidextrous Controller Group (5)

Posted on December 10, 2012 by ibn4course

The cnc mill was nearly finished and Remy forwarded the project to me. I recognized the problem but it was to late for me to reassemble it. The problem began with a spring and bolt. The bolt could not fasten … Continue reading →

Posted in Uncategorized | Tagged , , | Leave a comment

Ambidextrous controller Group 4

Posted on December 3, 2012 by ibn4course

The cnc mill is almost finished given that I helped to assemble steps 139-200. The assembly of rods and screws wasn’t a walk in the park. Many mistakes happened because of new bolts and screws were added for these tasks. … Continue reading →

Posted in Uncategorized | Tagged , , , , | Leave a comment

Ambidextrous Controller Group 3

Posted on December 3, 2012 by ibn4course

I would like to thank Remy and Ahmad for reducing tasks and supporting the project. And I want to explain my development of the cnc mill. At first I couldn’t manage the charts and images, but with help from Remy … Continue reading →

Posted in Uncategorized | Tagged , , , | Leave a comment

Ambidextrous Controller Group

Posted on November 27, 2012 by ibn4course

On Thursday my team evaluated the zen tools cnc mill, and produce a assembly chart with photographs. We were unable to make the unit, but in the near future we will use the tool to produce a controller body. The … Continue reading →

Posted in Uncategorized | Tagged | Leave a comment

Controller group

Posted on November 19, 2012 by ibn4course

Today we searched for a sensor, but we didn’t find any. We hope to have ahmad for tuesday, and calibrate the sensors for programming. Also we have gotten a setup for this calibrating in v314 with a mac. This will … Continue reading →

Posted in Uncategorized | Tagged | Leave a comment

Project Start

Posted on November 14, 2012 by ibn4course

I believe that with the winning election that the ambidextrous controller will be a benefit to the world. And without the joystick all we need is a cnc mill to produce a tangible design for our controller. If be the … Continue reading →

Posted in Uncategorized | Tagged | Leave a comment

Project Proposal

Posted on November 8, 2012 by ibn4course

In the project a controller is created for the sensing of switch for the orientation of buttons and sensors. I will be working with Ahmad and Remy who are considering the evolution of gaming controllers and joysticks. With their expertise … Continue reading →

Posted in Uncategorized | Tagged | Leave a comment