Ambidextrous Controller Group 3

I would like to thank Remy and Ahmad for reducing tasks and supporting the project. And I want to explain my development of the cnc mill. At first I couldn’t manage the charts and images, but with help from Remy I learned to search the diagram and find what images supported the steps for assembling the cnc mill. I had challenges with the server motor and made the unit with screws, bolts, and washers. It wasn’t tedious until my hands gave up from screwing. A mishaps happened, because I assigned a set of pieces to the wrong image in the diagram, and it resulted in a crack in the frames. I also helped Remy and Ahmad several times. One time Remy and I collected materials and tools that developed most of the pieces for the day. Using a vice grip, a c-clamp, and lastly a table clamp we corrected are mistakes which were incorrect due to the images explanation. The images readily explained how to use a table clamp instead of the hand tools, and the pieces had been assembled correctly after review. Ahmad and I were the last to assemble the steps 125- 139 and Remy completed what we didn’t start. I believe that this was a good start and finish, and next time we shall finish.