Objective- control a servo motor with a knob
Materials-
- Arduino Board
- (1) Servo Motor
- (1) Potentiometer
- hook-up wire
Procedure-
1-deliver note to hot blond maid,( i have no idea what hes talking about.)
2- sneak away so she doesn’t know who left it ( i’m still clueless)
3- gather all of your materials need to
4-hook up arduino board to computer
5- upload blink program to check that board is running
6- look up how to wire the servo and knob on arduino website (that failed so in i come late and solve the problem by thinking logically)
7- wire up servo to board
8-hook up knob to board
9- check that all wires are in correct place
10- load up the servo/knob program on board
11- check that it is working
12- get really excited that it does
13- unlucky number
14- invert controls in coding
15- check that its working
16- watch the other pass out cause it works
17- watch the others come to in time to see me stuggle with the hardware bit. had an idea but was afraid of frying the board.
18- attempt to invert on the hardware side of board
19- check if it works
20- IT DOES!!! turns out my first idea was right and i shoudlve just done it instead of being and scared bahby aaarrgg
CONCLUSION-
We were successful in setting up the board, loading up the program, making it work, and inverting in both the software and hardware side.
