Objective; To take apart Audiovox FM Transceiver, examine the insides and then put it together again.
Materials; Audiovox FM Transceiver, philips head screwdriver, springy-thingy(antenna), 6 rubber buttons, 2 plastic buttons. circuit board, mic, 1 inch LCD screen, 7 resistors, 4 Micro controller
Procedures;
1) Remove the battery cover
2) Remove the 5 screws holding it together
3) Remove the back half of the body
4) Remove the buttons
5) Remove circuit board
6) Attempt to remove plastic weld around speaker
7) Cut yourself trying to remove the speaker
8) curse the technology gods
9) Accidentally remove the wires connecting the speaker to the circuit board
10) Curse the gods again
11) Hit the speaker with the back of the screwdriver
12) That fails to work
13) Think about putting it back together
14) Insert circuit board back in shell
15) Put buttons back in
16) Put back shell piece back on
17) Re screw screws back into place
18) Put battery cover back on
19) Write up lab report
20) Contemplate life
Conclusion;
We successfully toke apart, documented, and put back together a Audiovox FM Transceiver
