CET 4711 Final Project: Missile Launcher

You are currently viewing a revision titled "Arduino Code", saved on December 18, 2012 at 6:51 pm by Huan Yang
Title
Arduino Code
Content
•int val=255;
•int v_motor = 3; //vertical motor
•int h_motor = 5; //horizontal motor
•int f_motor = 6; //firing motor
•
•void setup() {
•  Serial.begin(115200);
•  Serial.println(F("Enter the following command to control motors"));
•  Serial.println(F("1 - vertical motor"));
•  Serial.println(F("2 - horizontal motor"));
•  Serial.println(F("3 - firing motor"));
•  Serial.println(F("4 - motors stop"));
•}
•void loop() {
•  int control = 0;
•  control = Serial.read();
•  if (control == '1'){
•    Serial.println(F("vertical motor is running"));
•    analogWrite(v_motor, val);
•
•  } else if (control == '2'){
•    Serial.println(F("horizontal motor is running"));
•    analogWrite(h_motor, val);
•
•  }else if (control == '3'){
•    Serial.println(F("firing motor is running"));
•    analogWrite(f_motor, val);
•
•  }else if(control == '4'){
•    Serial.println(F("motors stop"));
•    analogWrite(v_motor, 0);
•    analogWrite(h_motor, 0);
•    analogWrite(f_motor, 0);
•  }
•}
Excerpt
Footnotes


Old New Date Created Author Actions
December 18, 2012 at 11:51 pm Huan Yang
December 18, 2012 at 11:50 pm Huan Yang
December 18, 2012 at 11:50 pm Huan Yang