Monthly Archives: October 2018

AG Scenery Corner HW

SANDRA MEJIAS – ANGLE PICS

  The conservatory room is just different flats connected together with hex bolts,nuts and washers.these two flats are in angle with 3 hex bolts connecting both flats.the ceiling of this room is each flat at an estimated 45 degree angle … Continue reading →

Hex Bolts have hexagonal heads and are for general purpose applications with a socket type installation tool or standard wrench. The standard bolt is compatible with standard nuts and washers of the same thread pitch, grade, and finish. Grade-8 bolts … Continue reading →

Before class on October 22nd, walk through the Haunted Hotel and find examples of the following things: an outside corner an inside corner an corner with an angle other than 90 degrees Take a picture of each joint (front and … Continue reading →

Pneumatic Tools Pneumatic tools were originated to help with the building of wooden airplanes. The tool works by using pistons in the inner workings and compressed air that is attached via hose on the bottom of the tool. To load in … Continue reading →

BEFORE beginning any kind of project you must remember the 5 P’s Prior Planning Prevents Poor Performance Think about the whole project before you starting doing anything and ask yourself these questions What are you building? What materials will you … Continue reading →

Flat construction: You have to call a lumber yards for custom size pieces. Home Depot is good for stock sizes. 4×8 isn’t the only stock size (longest 6×16) Pg. 105-118 in Stock Scenery Handbook shows how to join pieces together. … Continue reading →

9/26/2018   Lumber Ordering: Stick Lumber: Size, Grade, Species, Quantity Ex: 1×6 – 16’, No. 2, Pine, 1600 LF Sheet Lumber: Thickness, Species, Quantity Ex: ¼” Lauan – 8 Sheets   Notes: -Always order more than you need, roughly 20% … Continue reading →