102 thoughts on “Assignments”

1. walkiriacabrera March 22, 2012 at 1:42 am

   So we are taking the plans of our house and outlining just the entire area (nothing but that) of what is being cut in the laser cutter.. we don’t have to include the interior walls yet or the doors that comes a little later afterwards.. and also i know you explained about the graphic scale but how do you make one so i can have it on my drawings?

   Reply ↓
   1. Prof. Tim Maldonado, William Valdez Post authorMarch 22, 2012 at 6:56 am

      Yes include the interior walls by using scoring or etching. Draw a bar with 5,10,15,20,30,40,50 feet numbers. Google some samples.

      Reply ↓
2. walkiria March 22, 2012 at 9:27 am

   Okay thank you.. We need these to be cut out for Monday as well

   Reply ↓
   1. Prof. Tim Maldonado, William Valdez Post authorMarch 22, 2012 at 6:04 pm

      Yes

      Reply ↓
3. walkiriacabrera March 22, 2012 at 11:39 am

   Do we have to show the thickness of the wall or do we just show a single line when we send it to the laser cutter?

   Reply ↓
   1. Prof. Tim Maldonado, William Valdez Post authorMarch 22, 2012 at 6:06 pm

      No thickness just delete the exterior wall line as I mentioned in class and the interior line becomes your exterior cut line (blue color)

      Reply ↓
4. walkiriacabrera March 23, 2012 at 7:59 am

   Yes i remember that but I’m sorry i specifically meant for the interior walls of the plans? i already did that part you just explained.. and do we need to have these files cut already for Monday?

   Reply ↓
   1. Prof. Tim Maldonado, William Valdez Post authorMarch 23, 2012 at 7:43 pm

      Not really you can cut them on Monday at least some of them while we are working on the other models

      Reply ↓
   2. Prof. Tim Maldonado, William Valdez Post authorMarch 23, 2012 at 7:49 pm

      Yes the interior walls should be single lines .

      Reply ↓
5. walkiriacabrera March 24, 2012 at 10:27 am

   oh alright thank you

   Reply ↓
6. Abdur Rehman March 26, 2012 at 9:13 pm

   since i was not present today in calls any1 wanna tell what to bring for Wednesday?

   Reply ↓
   1. Prof. Tim Maldonado, William Valdez Post authorMarch 26, 2012 at 10:26 pm

      Everything that was due Today and your model pieces (laser cut) ready for assembling.

      Reply ↓
7. christianplaza March 27, 2012 at 9:03 pm

   professor i did my laser cutting today in the scale of 17 inches .. and i dont like it its to small.. can i do it on te 1/8 scale?

   Reply ↓
   1. Prof. Tim Maldonado, William Valdez Post authorMarch 27, 2012 at 9:58 pm

      Let me see it tomorrow and then you can decide. Ok

      Reply ↓
8. christianplaza March 27, 2012 at 10:00 pm

   ok.. ill b there around 9 -10

   Reply ↓
9. christianplaza April 15, 2012 at 1:48 pm

   professor do we need to bring our model tomorrow?

   Reply ↓
   1. Prof. Tim Maldonado, William Valdez Post authorApril 15, 2012 at 10:10 pm

      only if you want me to see it tomorrow but you can show me photos.

      Reply ↓
10. Prof. Tim Maldonado, William Valdez Post authorAugust 28, 2012 at 9:37 am

    SDFFASFDASDFASFASDFASDFASDFASDFSDF

    Reply ↓