- OpenOpen
Three Tier System – Maciej ’Matt’ Citowicki
This is the three tier system project for the splinter group of me: maciej ’matt’ citowicki.
This is an ID Scanner system that will help Professor’s take attendance in their classes. The students will swipe their school ID card and the system will record the students name. It will give the student a 1 […]
- OpenOpen
- OpenOpen
Main purpose for this project is to control the led by sending the signal from the arduino to the led to make light show
- OpenOpen
The security box is very simple, with the use of 2 led’s as well as the Arduino, if successfully code correctly we should be able to create a simple security box.The above schematic shows what is needed to p […]
- OpenOpen
- OpenOpen
This is a simple lock mechanism to represent the opening of a lock. When you get the code right, a clear LED lights up and the servo moves, unlocking the security box. Otherwise, a red LED is lit up and the box […]
- OpenOpen
- OpenOpen
A music player made using a Raspberry Pi. It is controlled by push buttons that are wired to the Raspberry Pi’s GPIO pins. The program used to read the push button inputs and control the music player were written […]
- OpenOpen
IOIO enabled, android app controlled, dual control RC Car
The purpose of this project is to control a RC car through a Bluetooth enabled IOIO board by an android app without cutting off the initial control scheme for the RC car, essentially creating a dual controlled RC car.
- OpenOpen
