We will be meeting on site at 55 Willoughby St for the next class at 1:30pm. Please complete the emailed forms if you have not done so yet!
- Miro board link : https://miro.com/app/board/uXjVLU1AnRE=/?share_link_id=839274331733 (Password: AntoniGaudi)
- In-class Revit demonstration recordings for a rainscreen backup wall at the parapet: https://www.dropbox.com/scl/fo/cqpg2cozh09e0mnzlzt9x/AHYdthG94N3GU60YowIma7I?rlkey=8c98o80ov5uazaqemf7bqibdt&dl=0
Due for next class:
- Rain Screen [FOCUS ON THIS]
- Finalize panelization to be within the max/min requirements based on your research. Pay attention to panel sizes around the fixed windows and use that as a guide (similar to structural grid for glazing). If you cannot find panel sizes information for your product, please let me know and I will give you default values to use.
- Model generic backup wall at all locations and pick one side to model in greater detail using the studs, sheathing, waterproofing as demonstrated in class.
- Set up views on your sheets including:
- 4 views of overall model
- Start this by working at 1/8″-1/4″ scale
- Dimension panel sizes and align your views
- 3d axon diagram
- 4 views of overall model
- Sub framing will be further developed next class.
- Glazing
- We have spent the last week diving deeper into various glazing systems.
- Finish up modeling your systems and panelization should be complete.
- Set up views on your sheets including:
- 4 views of overall model
- Start this by working at 1/8″-1/4″ scale
- Dimension panel sizes and align your views
- 3d axon diagram
- 4 views of typical unit focusing in a structural bay as we saw in the example drawing set in class
- Should be at a larger scale than the overall model
- Details (largest scale):
- Typical vertical and horizontal joint at slabs
- Outside corner
- Inside corner
- 4 views of overall model
