Projects on the OpenLab Search

Main purpose for this project is to control the led by sending the signal from the arduino to the led to make light show

The security box is very simple, with the use of 2 led’s as well as the Arduino, if successfully code correctly we should be able to create a simple security box.The above schematic shows what is needed to p […]

Final project for CET 4711

This is a simple lock mechanism to represent the opening of a lock. When you get the code right, a clear LED lights up and the servo moves, unlocking the security box. Otherwise, a red LED is lit up and the box […]

This is my project

A music player made using a Raspberry Pi. It is controlled by push buttons that are wired to the Raspberry Pi’s GPIO pins. The program used to read the push button inputs and control the music player were written […]

The purpose of this project is to control a RC car through a Bluetooth enabled IOIO board by an android app without cutting off the initial control scheme for the RC car, essentially creating a dual controlled RC car.

Finish setup of maxillary and mandibular teeth, and setup to festoon

Raymond Tang Kemar White Stationary Nerf Sentry Gun Our idea for our final project is a stationary nerf sentry gun. A sentry gun is able to automatically aim and fire at targets. Therefore it will have two […]

I have done an examination on the unknown waterfront Site 1 A sample. The gram stain procedure was performed , along with many various tube tests like Nitrate test,citrate test,SIM test,Lactose test ,glucose and […]

For my final project I created a synthesizer using the Arduino microcontroller. I used potentiometers to control pitch, decay, and repetition frequency in the synthesizer. I connected an audio jack socket to the […]

We wanted to create a teddy bear that can talk when it recognizes a card which is called a RFID tag. It will play back what I record. Our project is based on a bear which talks when it is near an object. The way […]