Final Report (Due on Dec. 16th)

Posted by on Nov 27, 2014 in JR CNC Router Table | No Comments
Final Report (Due on Dec. 16th)

The team needs to add another chapter (Chapter 6) into the report which goes by the name of Product Redesign.  This chapter describes the actions you have taken to improve the initial product design. It should be organized as following: Design issues and how it was identified. It could be misunderstanding of the physical principles […]

Exploded View (Video)

Posted by on Nov 24, 2014 in JR CNC Router Table | No Comments
Exploded View (Video)

In order to show all the components that will be found in the most innovative CNC Router Table; the team created an Exploded View Video. Click on “JR CNC Router Table Exploded View Video” to watch it  Enjoy!

Five-Chapter Report (Updated on Nov. 22nd)

Posted by on Nov 22, 2014 in JR CNC Router Table | No Comments
Five-Chapter Report (Updated on Nov. 22nd)

Please view the latest version of the Report 🙂 Stay tuned! – It’s now time to manufacture!

Motion Analysis (FEA)

Posted by on Nov 15, 2014 in Gallery, JR CNC Router Table | No Comments
Motion Analysis (FEA)

A motion analysis was conducted after completing the detailed CAD designs and the assembly. By doing so, the team had the ability to encounter any possible collision. The images below help you visualize the possible movements that will be generated in final physical product.

Update/Modify/Create the following

Posted by on Nov 15, 2014 in To Do List | No Comments
Update/Modify/Create the following

The updated 4-chapter report is due on Tuesday, Nov. 18th, 2014. Let’s please work on the following and finish before the deadline

Cutting the C-Channel Tubes (1 3/4″ x 1 3/4″)

Posted by on Nov 11, 2014 in JR CNC Router Table | No Comments
Cutting the C-Channel Tubes (1 3/4″ x 1 3/4″)

These C-Channel Tubes (1 3/4″ x 1 3/4″) will be used for the Base of (JR)^2 CNC Router Table. The following picture shows the process the operator went through in order to cut the pieces to size.