Imperial (US) sizing resources
Use these US span tables:
space joists either 12″, 16″ or 24″ oc
Sawn Lumber use:
American Wood Council (AWC)
https://awc.org/resourcehub/calculators-and-tools/
CHAPTER 5 FLOORS,
Residential Code of New York State
https://codes.iccsafe.org/content/NYSRC2020P1/chapter-5-floors#NYSRC2020P1_Pt03_Ch05_SecR501
Engineered Lumber use:
Forest Products Supply
http://www.fp-supply.com/st-louis-trusjoist-tji-i-joists.html
Metric sizing resources
Use these European span tables:
space joists either 400mm or 600mm oc
Sawn Lumber use:
only the typical thicknesses 47X?? and 63X??
Dead load per square metre (in kN/m²) supported by joists “More than 0.5 but not more than 1.25” Do not use “more than 0.25 but not more than 0.5″
C16 or C24 timber
https://www.timberbeamcalculator.co.uk/span-tables/floor-joists
or
http://nhbccampaigns.co.uk/landingpages/techzone/previous_versions/2011/Part6/section4/appendix.htm#64AT2
Engineered Lumber use:
Dead load per square metre gk = 0.75 kN/m2
Use “SJL 45” if possible avoid using “SJL 90”
span tables link
steico manufacturer’s website
Links:
- American Wood Council (AWC)
https://awc.org/ - Forest Products Supply
http://www.fp-supply.com/st-louis-trusjoist-tji-i-joists.html - The Engineered Wood Association (APA)
Advanced Framing Guide
https://www.apawood.org/ - Span Tables Tutorial
https://www.awc.org/codes-standards/spantables/tutorial - Lecture Notes
https://openlab.citytech.cuny.edu/bt2-2024f/files/2022/03/Joists22s.pdf
