Create 1 joist plan (minimum) for submitted to Brightspace
S-103 6TH FLOOR JOIST (TYPICAL APARTMENT) [referencing the grid and foundation plans]
S-104 7TH FLOOR JOIST (PENTHOUSE) [Optional]
S-105 ROOF RAFTER PLAN [Optional]
Resources for joist sizing can be found at “11 Floor Joist Spacing and Layout” on open lab
Utilize the sketches on Miro for basement reference
Include labeling and sizing calculations your joist plans
Beam Sizing
industry reference tables:
Imperial (US):
- https://www.southernpine.com/span-tables/headers-beams-size-selection-tables/
- https://awc.org/calculators/span-options-calculator-for-wood-joists-and-rafters/
- https://bct.eco.umass.edu/publications/articles/sizing-engineered-beams-and-headers/
- https://www.weyerhaeuser.com/woodproducts/engineered-lumber/resources/sizing-table-lookup/floor-beam-sizing-calculator/
You should have the following drawings, and XREF completed:
S-001 STRUCTURAL GRID
S-010 FOUNDATION PLAN
S-102 JOIST PLAN, [TYPICAL]
A-101 CELLAR PLAN
A-102 FIRST FLOOR (GROUND)
A-103 6TH FLOOR (TYPICAL APARTMENT)
A-104 7TH FLOOR (PENTHOUSE)
A-201 NORTH ELEVATION
A-202 SOUTH ELEVATION
A-203 EAST ELEVATION
A-204 WEST ELEVATION
A-301 BUILDING SECTIONS [east to west]
A-302 BUILDING SECTIONS [north to south]
XREF AUTOCAD DRAWINGS (LINKED DWG FILES)
N/A GRID
N/A TITLE BLOCK (Optional) [you will need to change your title block from a block to an X ref]
Submittal:
submit BOTH the pdf and the dwg files.
boards, 34×22 in PDF format
combine the individual pdf pages into 1 file.
DWG files and xrefs in e-transmit format
Name files using the following naming convention:
All digital files must be submitted in the following format:
Course number semester/year_Professor initials _Project Name_ Student Name (file number)
For example: ARCH2331_ F24_AA_B05Joist_BDoshi (01)
files not conforming to department standards may be graded.
The previous semesters instructions:
Create 2 joist plan (minimum) for submittal on blackboard
S-102 FIRST FLOOR (ground floor) [drawn on the foundation plan]
S-103 SECOND FLOOR (attic floor) [drawn on the ground floor plan]
S-104 ROOF PLAN (Rafter) [Optional]
Resources for joist sizing can be found at “11 Floor Joist Spacing and Layout” on open lab
Utilize the sketches on Miro for basement reference
Include labeling and sizing calculations your joist plans
Beam Sizing
industry reference tables:
Imperial (US):
- https://www.southernpine.com/span-tables/headers-beams-size-selection-tables/
- https://awc.org/calculators/span-options-calculator-for-wood-joists-and-rafters/
- https://bct.eco.umass.edu/publications/articles/sizing-engineered-beams-and-headers/
- https://www.weyerhaeuser.com/woodproducts/engineered-lumber/resources/sizing-table-lookup/floor-beam-sizing-calculator/
You should have the following drawings, and XREF completed:
ARCHITECTURAL DRAWINGS
A-101 CELLAR
A-102 FIRST FLOOR (ground floor)
A-103 SECOND FLOOR (attic floor)
A-104 ROOF PLAN
XREF AUTOCAD DRAWINGS (LINKED DWG FILES)
N/A GRID (if applicable)
N/A TITLE BLOCK [you will need to change your title block from a block to an X ref]
Submittal:
submit BOTH the pdf and the dwg files.
boards, 34×22 in PDF format (three boards minimum)
DWG files and xrefs (etransmit)
combine the individual pdf pages into 1 file.
Name files using the following naming convention:
All digital files must be submitted in the following format:
Course number semester/year_Professor initials _Project Name_ Student Name (file number)
For example: ARCH2331_ SP24_AA_A01Logo_BFuller (01)
files not conforming to department standards may be graded.
