This assignment is primarily a sum of all previous assignments. The drawings that you have not previously been submitted should be included in the submission include the mechanical plan and the stairs structural drawing. You may include additional drawings as indicated in the drawing list below. For this submission quality is emphasized over quantity. Refer to assignments B02- B08 instructions for more details on specific sheet.
Drawing list (image):
Submittal:
All boards, 24×34 (minimum) in a PDF format combine file
Autocad files (use e-transmit to pack and zip)
3D model (if you have developed your 3D model since last submission)
Name files using the following naming convention:
course_professor initials_semester_project name_student name
(ex: ARCH2331_AA_F23_Grid_JoseSanchez-01.jpg)
files not conforming to department standards may be graded.
FINAL DRAWING LIST
Professor Aptekar Fall 2023 (rev.5/18/23)
G-100 | COVER SHEET |
S-010 | FOUNDATION PLAN |
S-101 | JOIST PLAN |
S-111 | STUD FRAMING PLAN |
S-121 | STAIR PLAN AND SECTION |
S-901 | FRAMING MODEL |
A-100 | CELLAR PLAN |
A-101 | FIRST FLOOR (ground) |
A-102 | SECOND FLOOR (bedrooms) |
A-103 | THIRD FLOOR (master bedroom/deck) |
A-104 | ROOF PLAN |
A-201 | NORTH |
A-202 | SOUTH |
A-301 | BUILDING SECTIONS [north to south] |
A-302 | BUILDING SECTIONS [east to west] |
A-501 | FULL WALL SECTION OVERALL |
A-502 | FULL WALL SECTION DETAILS |
A-503 | FULL WALL SECTION DETAILS |
M-101 | FIRST FLOOR (GROUND) HVAC PLAN |
FINAL DRAWING LIST
Professor Zagaroli Fall 2023
G-100 | COVER SHEET (LIST OF DRAWINGS) |
S-010 | FOUNDATION PLAN * *NOTE: ALL PLANS = 1/4″=1′-0″ |
S-101 | JOIST PLAN (TYPICAL FLOOR) * |
S-111 | STUD FRAMING PLAN (TYPICAL FLOOR) * |
S-121 | STAIR PLAN AND SECTION 1/2″=1′-0″ OR LARGER |
S-901 | FRAMING MODEL ( 4 VIEWS ) |
A-101 | FIRST FLOOR * |
A-102 | SECOND FLOOR * |
A-103 | THIRD FLOOR * |
A-104 | ROOF PLAN * |
A-201 | FRONT ELEVATION (WEST) 1/4″=1′-0″ |
A-202 | SIDE ELEVATION (NORTH OR SOUTH) 1/4″=1′-0″ |
A-301 | BUILDING SECTION (NORTH OR SOUTH)1/4″=1′-0″ |
A-302 | BUILDING SECTIONS (WEST TO EAST) 1/4″=1′-0″ |
A-501 | FULL WALL SECTION OVERALL 1/2″=1′-0″ |
A-502 | FULL WALL SECTION DETAILS 1″=1′-0″ OR 1-1/2″=1′-0″ |
A-503 | FULL WALL SECTION DETAILS 1″=1′-0″ OR 1-1/2″=1′-0″ |
M-101 | FIRST FLOOR HVAC PLAN * |