This assignment is primarily a sum of all previous assignments. The drawings that you have not previously been submitted should be included in the submission include the mechanical plan and the stairs structural drawing. You may include additional drawings as indicated in the drawing list below. For this submission quality is emphasized over quantity. Refer to assignments B02- B08 instructions for more details on specific sheet.
Drawing list (image):
Submittal:
All boards, 24×34 (minimum) in a PDF format combine file
Autocad files (use e-transmit to pack and zip)
3D model (if you have developed your 3D model since last submission)
Name files using the following naming convention:
course_professor initials_semester_project name_student name
(ex: ARCH2331_AA_S22_Grid_JoseSanchez-01.jpg)
files not conforming to department standards may be graded.
FINAL DRAWING LIST for sections D076 and E078
Professor Aptekar FALL 2022 (rev.11/20/22)
| G-100 | COVER SHEET |
| S-001 | STRUCTURAL GRID [OPTIONAL] |
| S-010 | FOUNDATION PLAN |
| S-101 | JOIST PLAN |
| S-102 … | JOIST PLANS, ADDITIONAL [OPTIONAL] |
| S-111 | STUD FRAMING PLAN |
| S-112 … | STUD FRAMING PLANS, ADDITIONAL [OPTIONAL] |
| S-121 | STAIR PLAN AND SECTION |
| A-100 | CELLAR PLAN (if applicable) [OPTIONAL] |
| A-101 | FIRST FLOOR (GROUND-KITCHEN-DINING) |
| A-102 | SECOND FLOOR (KITCHEN-DINING) |
| A-103 | THIRD FLOOR (BEDROOMS) |
| A-104 | DECK PLAN (SUNROOM BULKHEAD) |
| A-105 | ROOF PLAN |
| A-201 | NORTH |
| A-202 | SOUTH |
| A-203 | EAST & WEST (if applicable) [OPTIONAL] |
| A-204 | SUNROOM (if applicable) [OPTIONAL] |
| A-210 | SITE ELEVATIONS [OPTIONAL] |
| A-301 | BUILDING SECTIONS [North South] |
| A-302 | BUILDING SECTIONS [OPTIONAL] |
| A-501 | FULL WALL SECTION OVERALL |
| A-502 | FULL WALL SECTION DETAILS |
| A-503 | FULL WALL SECTION DETAILS |
| A-510 | PLAN WALL DETAILS [OPTIONAL] |
| M-103 | BEDROOMS FLOOR HVAC PLAN |
| M-10… | ADDITIONAL FLOORS [OPTIONAL] |
* This is a tentative drawing list and will shift as you develop your project.
FINAL DRAWING LIST for section D027 Professor Zagaroli FALL 2022 (rev.12/13/22)
| G-100 | COVER SHEET & LIST OF DRAWINGS |
| S-001 | SITE/MAP PLANS [Min. 3 scales: 1. Site, 2. Neighborhood, 3. Borough] |
| S-010 | FOUNDATION PLAN [CHOOSE S-010 OR S-101] |
| S-101 | FIRST FLOOR JOIST PLAN [CHOOSE S-010 OR S-101] |
| S-102 | SECOND FLOOR JOIST PLAN [required] 1/4″=1′-0″ |
| S-111 | STUD FRAMING PLAN, any plan 1/4″=1′-0″ |
| S-112 | ANY ADDITIONAL STUD FRAMING PLAN [OPTIONAL] |
| S-121 | STAIR PLAN AND SECTION 1″=1′-0″ |
| A-100 | CELLAR PLAN 1/4″=1′-0″ |
| A-101 | FIRST FLOOR PLAN 1/4″=1′-0″ |
| A-102 | SECOND FLOOR PLAN 1/4″=1′-0″ |
| A-103 | THIRD FLOOR PLAN 1/4″=1′-0″ |
| A-104 | ROOF PLAN 1/4″=1′-0″ |
| A-201 | NORTH ELEVATION [optional] |
| A-202 | SOUTH [required] 1/4″=1′-0″ |
| A-203 | EAST ELEVATION [required] and WEST ELEVATION [optional] 1/4″=1′-0″ |
| A-301 | West – East BUILDING SECTION 1/4″=1′-0″ |
| A-302 | ANY ADDITIONAL BUILDING SECTION [OPTIONAL] |
| A-501 | FULL EXTERIOR WALL SECTION (Foundation to Roof) 1-1/2″=1′-0″ OR 1″=1′-0″ |
| A-502 | EXTERIOR WALL DETAILS (3 Details: Roof, Window, and Typical Ext. Double Wall) 3″=1′-0″ OR 1-1/2″=1′-0″ |
| A-510 | PLAN WALL DETAILS [OPTIONAL] |
| M-103 | SECOND FLOOR HVAC PLAN 1/4″=1′-0″ [Diagram with ductwork, see lecture for example] |
| M-104 | ADDITIONAL FLOORS [OPTIONAL] |
SUBMITTAL: All drawings must be in .pdf format. Combine all pages and create a pdf for the Module. If size becomes an issue then split the drawings into 2 or more files. You MAY submit hand drawings as part of your final work. Just please locate those pdf pages in the correct order among the other digital pages. Thank you.
Submittal:
All PAGES plotted in paper space, using the department .ctb file in PDF format. Combine files!
3D model (if you have developed your 3D model since last submission)
Name files using the following department naming standard:
course_professor initials_semester_module_project info_student first and last name.pdf
(ex: ARCH2331_RZ_FA22_ModB_FinalDwgSet_JoseSanchez.pdf)
NOTE: Files NOT conforming to department naming standard might not be graded and may be returned.
