• Finding the sum of the first k terms of an arithmetic sequence (also called the kth partial sum)

• Geometric sequences and the general formula for the nth term of a geometric sequence

• Finding the sum of the first k terms of a geometric sequence (also called the kth partial sum)

• Finding the sum of a geometric series when

**Homework:**

• Review the definitions and formulas, and the examples we discussed.

• Do the assigned parts of Exercises **23.7** (I forgot to mention this in class), 24.1, 24.2, 24.3, 24.4

• Try doing 25.5 if you are interested (read the examples first)

• Do the WeBWorK – due by Monday 11 PM (along with the previously assigned WeBWorK)

• Don’t forget to prepare your Final Exam review problems for Tuesday! You can also use the Piazza discussion board to discuss them.

See this separate post for an important announcement from the Math Department about the Final Exam.

]]>

**Topics:**

• Sequences in general and some notation: introduction to arithmetic and geometric sequences

• Arithmetic sequences

• The general formula for the nth term of an arithmetic sequence:

We multiply d by (n-1) because we start adding d when we go to the second term.

• Summation notation

• Finding the sum of the first k terms of an arithmetic sequence: or

Use whichever form you find easiest to remember. To remember them more easily, recall how we derived the formula looking at Gauss’ trick for adding the first 100 natural numbers.

**Homework:**

• Review the definitions and notation introduced today, and the examples discussed in class. Make sure that you understand how we derived the formula for the sum of the first k terms of an arithmetic sequence given above.

• Do the assigned parts of problems 23.1, 23.3, 23.4 and 23.5 : we will return to the summation of 23.7 next time, but you may want to try it.

• Do the WeBWorK (due next Monday by 11 PM, but start early!)

• Look over the Final Exam Review sheet (handed out in class or available from the link in the sidebar) and choose some problems you would want to present next week on review day. You will sign up for one problem next time, but there will be the opportunity to volunteer for more, so prepare as many as you can.

]]>

Announcement from the Mathematics Department:

All students, without exception, are expected to appear at the scheduled time and place for their final examination in mathematics. [For this course, that means Thursday 22 May 2014, 8:00 AM, in our normal room.]

1. Students who are absent for the final examination will receive a final grade of “F”, “WN”, “WU” or “I”.

**2. An “I” grade will only be given to students who have a passing average going into the final.** [Passing average means 60%]

**Please note:** An “I” grade will affect a student’s ability to register for the next semester and to receive financial aid. An “I” grade must be removed by taking a makeup final or else it changes into an “F”.

**Make-up final examinations will be given only on the last day of summer session I.**

3. Students requesting make-up exams must make arrangements with the department secretary in room N711 in advance. They should bring the following information and documents:

* Instructor’s names and mathematics section

* Grade report for the semester

* Bursar’s receipt showing that the $25.00 exam fee has been paid

* Written excuse for absence from final examination, such as doctor’s note for illenss or funeral notice for death in family

* Validated NYCCT I.D. Card

4. A student who missed the final examination should contact his/her instructor or the Mathematics Department as soon as possible. [Note from Prof. Shaver: if you have been excessively absent (more than twice) during the term and also miss the final exam, you should definitely contact me, because otherwise I may assign you a grade of “WU” under the assumption that you’ve unofficially withdrawn from the course.]

** **

[Note from Prof. Shaver: When the grades are finished I will also send out email via WeBWorK, as I did at midterm.]

• Vectors in the plane

• Magnitude and direction angle of a vector

• Unit vectors

• Scalar multiplication

• Vector addition

**Homework:**

• Review the definitions, terminology, and notation in the examples regarding vectors. Most of it should be familiar from complex numbers: we just use different names and notation.

• Do the assigned problems from Session 22

• No Warm-Up because Test 4 is next time. Please see the Piazza discussion board where you can find graphs for the Test 4 review problems and also more information about which sessions the problems refer to.

• Do the WeBWorK (due Wednesday evening, the day after Test 4, by 11 PM).

]]>• The geometric representation of complex numbers: we represent the complex number a+bi as the point (a,b) in the coordinate plane (called “the complex plane” when we are talking about complex numbers). Better: we really think of a+bi as the **vector** which starts at the origin (0,0) and ends at (a,b).

• Review of operations on complex numbers.

• The absolute value (or modulus) of a complex number

Definition: |a+bi| is the distance between the point (a,b) and the origin (0,0) on the complex plane.

From the Pythagorean Theorem we find that we can compute

• The polar form of a complex number

The polar form has two coordinates:

, which is the angle in standard position to the vector ending at (a,b).

We can find by using the fact that , as you can see by looking at the graph.

• Changing from rectangular form (“standard form”) a+bi to polar form and vice-versa.

• Multiplying and dividing complex numbers using the polar form.

**Note:** I do not know of any application of complex numbers which uses the polar form with an angle in degrees. As far as I can determine, only radians are used in applications (to electrical engineering and various branches of physics). This is partly because the “angle” is usually time or some other one-dimensional quantity, not literally an angle. Also, in calculus it is much easier and more natural to work in radians. Therefore you should give all answers to the exercises in this section using radians for the angles.

For some information about the use of complex numbers in electrical engineering, and also a quick review of all of the above topics, you may want to view these documents:

Introduction to Complex Numbers in Physics/Engineering (I cannot figure out who the author of this very nice document is, but it comes from the Physics Department at College of Saint Benedict and Saint John’s University in Minnesota)

Complex Numbers and Phasors (by Professor Andrew E. Yagle, EECS 206 Instructor, Fall 2005 Dept. of EECS, The University of Michigan, Ann Arbor) [EECS = electrical engineering and computer science]

**Note:** The usual convention is that the angle (called the argument of the complex number) should be in the interval . However, this is not crucial. But make sure that your angle terminates in the correct quadrant!

**Homework:**

• Review the definitions and examples worked in class. Take advantage of this opportunity to review finding exact values of trig functions and inverse trig functions using the basic triangles and the points on the axes from the unit circle!

• Do the assigned problems from Session 21

• Do the WeBWorK – due tomorrow by 11PM, so start early!

• No Warm-Up until next week

• There is a new review problem on WebWorK, also due tomorrow by 11 PM. Again, this is optional and will count as extra credit to your WeBWorK score if you do it.

• Don’t forget that Test 4 is scheduled for next Monday 12 May. The review problems were handed out in class and will also be available, along with the answers, on Piazza.

]]>• Solving the basic trig equations: , , .

The methods are developed in these examples:

Example 20.1 for

Example 20.4 for

Example 20.7 for

Examples 20.3, 20.6, and 20.9 use the developed methods to solve other basic trig equations.

See the useful Summary just before Example 20.10 on p. 275

• Solving other types of trig equations by reducing them to one or more basic equations. (Examples 20.10 and 20.11)

• Solving other trig equations by reducing them to one or more basic equations.

**Homework:**

• Study the examples which were used to develop the methods for solving the basic trig equations. Make sure that you understand the reasoning behind them.

• Review the other examples discussed in class.

• Do the assigned problems from Session 20.

• Make sure you do the WeBWorK (assigned last time).

• No Warm-Up this time.

• Spend a few minutes every day reviewing the basics of trigonometry, and reviewing the properties of logarithms. I have posted a very short WeBWorK assignment “LogReview1” to help in this review. It is optional and will count as extra credit in your WeBWorK score. I will post other short review assignments throughout the rest of the semester.

]]>• The addition, subtraction, and double angle identities for tangent

• Proving identities

• The inverse trig functions (Session 19)

**Homework:**

• Review the examples discussed in class

• Review the definitions of the inverse trig functions and their properties

• Do the assigned parts of Exercises 18.1, 18.2, (assigned previously: do the tangent problems), 18.4 (double angle only)

• Do the assigned problems from Session 19

• Do the Warm-Up (due tomorrow evening by 11 PM)

• Do the WeBWorK (due next Monday by 11 PM)

]]>• Finding exact values for the trig functions using knowledge of basic triangles and points on the coordinate axes

• Basic graphs of sine, cosine, and tangent and their properties

• Transformed graphs of sine and cosine functions

Here are the notes I handed out in class: MAT1375TrigGraphsFivePointMethod

• Angle addition and subtraction identities

• Proving identities using them

The difference between the reference triangle and the other triangle the book uses: If you use the reference triangle, the values of the trig functions are the same for the reference angle as for the original angle, except for possible – signs (which depend on the quadrant the angle is in).

You can use either of the two triangles to find the coordinates of the point on the the terminal side, and then use the definitions of the trig functions.

**Homework:**

• Review the definitions of the trig functions, the unit circle picture also

• Review the examples discussed in class

• Do the assigned parts of Exercises 17.1 (exact values, not using a calculator, and practice using the basic triangles and the definition of the trig functions); 17.5, 17.6 (and as time permits, 17.3, 17.4)

• Do the assigned parts of Exercises 18.1, 18.2 (for tangent, either use that tangent = sine/cosine or look up the formula for tangent)

]]>

• Exponential functions in applications where the rate of growth or decay (decrease) per unit time is known. (See Examples 15.6, 15.7, and 15.8)

Exponential growth and decay occur when the rate of change is a percentage of the quantity that is growing or decreasing. (Technically, we say that the rate of change is proportional to the quantity.)

If the rate of change r is known (as a percent per unit of time), then the base of the exponential function is for exponential growth, or for exponential decay. In other words,

for exponential growth

for exponential decay

• Example 15.3(c) [left over from last time]

• Quick review of trigonometry (to be continued): See Session 17

Note: Better names for the two basic triangles are: the isosceles right triangle, and half of an equilateral triangle. These names are better for two reasons: first, they remind you of what the triangles are, and second, they are not tying you to the degree measure of the angles. (Remember, we are trying to learn to think in radians.)

**Homework:**

• Reread and review the examples from Session 15 that were discussed in class.

• Read Session 17

• Learn the two basic triangles for trigonometry. I recommend that you develop them from scratch the way that I did in class. Doing this a few times over a week or so will make them stay in your memory! Also practice thinking in radians.

• Finish the assigned problems from Session 15

• No WeBWorK or Warm-Up this time, because of the test next time. Test 3 Review answers and discussion are over on the Piazza discussion board.

]]>