Objective: We got are chassis today. We are trying to connect the breadboard, ardunio boards to the chassis. And also try an test out the motor, to see if it works.
Materials: The chassis, screw drivers, cables, wire cutters, arduino/bread boards, the motor, and an android smart phone.
Methods: We installed/included the AFMotor.h library. (Code for the motor)
We held up the chassis when we tested the motor so when the wheels moved so the chassis would not roll off the table and break.
Data:
Results: We tested out the motor and it worked. We also found out after testing it a few time that the max speed you can set it to is 255, and when you dont start it the speed is 0.
Discussion: For next class, we shall be putting in batteries, and testing the motor and a few of the other features.
