2 elevations and one section
- North elevation
- South elevation
- West elevation
- East elevation
- Full building section (long east-west)
- Full building section (short north-south)
- Full buildings section (additional are optional)
Considerations: Your sections should reflect the wall thicknesses reference from your stud plans. Update the sections to match your joist plans.
The building section should be cut through the cantilever be include elevation markers.
Considerations:
Indicate the ground level with a heavy line
dash in the outline of structure below grade
if you have a finish pattern use the lightest hatch line wait
Submittal:
submit as PDF prints and AutoCAD
2 boards, 22 x 34 (or 24×36) in PDF format, 2 elevations per board
AutoCAD DWG files and xrefs (“eTransmit” format)
10pm the day before your class the assignment is due
Name files using the following naming convention:
course_professor initials_semester_project name_student name (ex: ARCH2331_AA-KC_S23_Grid_JoseSanchez-01.jpg)
files not conforming to department standards may be graded.
