B07 Elevations & Section

2 elevations and one section

  • North elevation
  • South elevation
  • Full building section (North-South)
  • West elevation (optional)
  • East elevation (optional)
  • Building section (additional are optional)

These elevations should reflect your added sloped roof. Your project should convert approximately at least 1/3 to a sloped configuration. A gable or hip roof configuration. You may add a roof Deck.

The building section should be cut through the cantilever be include elevation markers.

Indicate the ground level with a heavy line
dash in the outline of structure below grade
if you have a finish pattern use the lightest hatch line wait

submit as PDF prints and AutoCAD
2 boards, 22 x 34 (or 24×36) in PDF format, 2 elevations per board
AutoCAD DWG files and xrefs (“eTransmit” format)
10pm the day before your class the assignment is due
Name files using the following naming convention:
course_professor initials_semester_project name_student name (ex: ARCH2331_AA-KC_S22_Grid_JoseSanchez-01.jpg)
files not conforming to department standards may be graded.