Class Info
- Date: Friday, 10/30
- Meeting Info: https://zoom.us/j/98469387899?pwd=R1R5S3RTTGFzeWlORHNMa0dka0xPdz09
- Meeting ID: 984 6938 7899
- Passcode: 123123
To-Do Before Class
- Module 2 Drawing Assignment
- Lay out grid lines and develop plan detail
- Using plan detail, lay out and develop section detail
- All detail drawings to be done at 1/2″ = 1′-0″ scale
- Reading #6, Windows 8.22-8.23, 8.27
Topic
Exterior wall drawing development
Objectives
- Continue to develop the Module 2 drawings
Activities
- Group D – Reading #6 presentation
- Reading #6 recap
- In class activity – Building with modules (1 hour)
- Everyone shall design a small building that can fit on a 20′ x 20′ plot of land.
- The buildings can take up the whole lot, or only a portion of it, but all buildings must be at least 120 SF in floor area, and between 10′ and 15′ tall.
- Buildings shall be built using standard 8″ x 8″ x 16″ CMU blocks, with no cutting of blocks allowed (only full and half blocks).
- Buildings must have at least 2 doors and 2 windows.
- Deliverables include:
- 1 Floor Plan with key dimensions
- 4 Elevations with key dimensions
- All drawings at 1/2″ = 1′-0″ scale
- Upload to Dropbox here
- Everyone shall design a small building that can fit on a 20′ x 20′ plot of land.
- Review plan detail progress
- Section and Axon in-class drawing demonstration
- Link to the recording here
To-Do After Class
- Module 2 Drawing Assignment
- Using plan detail, lay out and develop section detail
- Using plan and section details, begin setting up the axon
- All detail drawings to be done at 1/2″ = 1′-0″ scale
- No reading this week!
Leave a Reply